Single Gauge Hose
 |
 |
Dacor Divers Single Hose Regulator w Pressure Gauge VINTAGE |  |
 |
US $24.99 | 1d 15h 39m |
| Powered by phpBay Pro |
Single Gauge Hose
Why is my Ford Escort car overheating?
It hasn't overheated as such YET (i.e. started spewing steam) but it gets to the red on the temp. gauge very quickly. The top hose is hot but the bottom (and expansion) hose is cold. The radiator is also cold.
What does this mean? It isn't losing coolant and i don't believe it's the thermostat based on what I've written above. The fan also works.
The symptoms occured during a single journey (the temp gauge had never been anywhere near the red before).
change the engine coolant thermostat. You can just remove it altogether in an emergency to get back on the road. It's under the bell shaped housing where the big top radiator hose connects to the engine.
|
|
Dacor Divers Single Hose Regulator w Pressure Gauge VINTAGE | |
|
US $24.99 | 1d 15h 39m |
| Powered by phpBay Pro |
|
|
Single Gauge Pillar Pod $29.99 Single Gauge Pillar Pod; |
|
|
OTC Gauge and Hose Assembly. Each $107.28 Manufacturer: OTC. Each. Features Benefits: Sturdy 3-1/2 in. dial face gauge with accuracy within +/- 1% has a built in retard to protect gauge from overpressure damage 6 ft. long bleed hose and 30 in. long pressure hose Customers also search for: Dis |
|
|
OTC OTC7211 Gauge and Hose Assembly $159.13 Features and Benefits: Includes 6ft. bleed hose and 30 pressure hose Bleed valve eliminates air from injection system and can be used to reduce pressure when disconnecting hoses Bleed valve also allows gauge assembly to be used to check fuel pump volume Gauge and hose assembly weight: 1 lb. 3 oz.This gauge is designed to work with any of our fittings for testing fuel injection systems. It features a sturdy 31/2 dial that reads 0100 psi. It also has a built in (100150 psi) retard to prevent excess pressure damage. The assembly s disconnect fitting has a check valve to lessen chance of fuel spray. |
|
|
Gauge Adapter Mr Gasket Gauge Adapter 2975 $17.93 MR GASKET FUEL PRESSURE GAUGE ADAPTER, ALUMINUM, ANODIZED GOLD -- 1/8 in. diameter NPT for fuel gauge; 3/8 in. O.D. tube ends; Includes two hose clamps; For use in single carburetor, stock-type engines, or multi-carburetion where a Y-fuel block and fittings are not used; Mr. Gasket oil and fuel gauge kit with part number 2810 is recommended; Use teflon tape part number 2842G on threads for a positive seal.. Auto Parts Warehouse has extensive Mr Gasket Gauge Adapter catalogs.We are now offering FREE shipping on all Mr Gasket Gauge Adapter orders over $50.00. Our secure mr gasket gauge adapter catalog is available every hour of everyday. Shop with confidence for all your mr gasket gauge adapter needs. Mr Gasket Gauge Adapter are In Stock and available today. Save up to 60% off dealer price on your next Mr Gasket Gauge Adapter purchase. Our online catalog contains a wide selection of the OEM and aftermarket parts you need at unbeatable prices |
|
|
RL Flo-Master Deluxe Electric Inflator Replacement Gauge and Hose $67.95 This replacement gauge and hose only is for use with the Heavy-Duty Electric Inflator. |
|
|
BIKEMASTER DIAL TYPE AIR PRESSURE TIRE GAUGE WITH HOSE - 0-15 PSI $23.99 BIKEMASTER DIAL TYPE AIR PRESSURE TIRE GAUGE WITH HOSE - 0-15 PSI |
|
|
BIKEMASTER DIAL TYPE AIR PRESSURE TIRE GAUGE WITH HOSE - 0-60 PSI $21.99 BIKEMASTER DIAL TYPE AIR PRESSURE TIRE GAUGE WITH HOSE - 0-60 PSI |
|
|
ACCUGAUGE AIR PRESSURE TIRE GAUGE WITH HOSE - 0-15 PSI $24.99 ACCUGAUGE AIR PRESSURE TIRE GAUGE WITH HOSE - 0-15 PSI |
| Account limit of 2052 requests per hour exceeded. |
Grout Mixer/Pump, All-in-One Grout Plant, Grout Pumps, Grout Mixing, Airplaco HGA 530
What equipment is needed to pull a vacuum on a R-410a split air conditioner system?
I took a class a while back on a/c to be certified to handle refrigerant, but cant remember the names of the tools i need. I would like to know specific names of the fittings, hoses, and vacuum pump to connect to a 2ton mini split air conditioning system. The one i speak of is pre-charged with R410a refrigerant, and has a bike valve type fitting, which i believe is where i connect the vacuum pump to pull a vacuum. Im looking for the cheapest most basic setup to get me going... i probably dont even need to look at a gauge, but a single vacuum gauge would be a help... What do i need????
wow, can you please read what i wrote. i am certified, it was not much of a challenge at all. i can handle refrigerant and buy sell what i need. how about giving me a valid answer. what kind of manifold set, adapters for r410a, and vacuum pump... thanks to the people who read it all!!
Sorry, but if you are not certified to do this kind of work you could not only damage your system, but release refrigerant into the atmosphere, which as you know is illegal. Best leave this to a professional. Just so you know, you will need at least two gages.
