Scuba Diving Gear

Air Gauge

On the highway, all of a sudden I lost power, air/fuel ratio gauge went out, & engine lite went on.What gives?

I just bought this used 1995 Honda Civic EX from a private party. He had a few bells & whistles on it that his uncle put on when he owned it since he worked for a Honda dealership.

He put in an AEM cold air intake, a catback exhaust, and some little stuff like the air/fuel ratio gauge and an oil pressure gauge mounted above the dash.

The air/fuel lights usually stayed right inbetween lean and rich, right in the middle. Now, there are no lights and after I turn on the ignition, after about 5 minutes of driving, the engine light turns on. I don't have an OBD I scanner to diagnose the problem although of course I wish I did. AutoZone only has the OBD II's so they can't help which is a shame cuz they scan the computer for free.

Since that day on the highway, I haven't lost power. The guy at AutoZone said it's probably my transmission but the trans was just rebuilt at 123,500 miles and there's 132K on it now. Could this have anything to do with the cold air intake? Please help.

your MAP or MAF sensor could be dirty. If so, take it out (usually an easy job), stick it in a bag with some rubbing alcohol, slosh it around and such, and then let it air dry really well.

guy above me: You know that tons of GM cars arent made in the US, and civics ARE right?

Air Arms MPR Air Tank, Built-in Gauge $171.52 MPR air tank Built-in air pressure gauge (manometer)

Air Venturi Inline Air Pressure Gauge, 0 to 4500 psi $55.19 Inline air pressure gauge Measures up to 4500 psi Female quick-disconnect Male fitting If you use high-pressure fill devices for your precharged pneumatic guns and don't have a pressure gauge on your fill device, this will do the job. The inline air pressure gauge fits the Air Venturi carbon fiber tank, AV-4500HPT.

AirForce Scuba Refill Clamp with Gauge $78.6 Scuba yoke fill station 1/4" AirForce tank adapter Fits scuba tank with standard k-valve 1" diameter micro-gauge reads from 1-5,000 psi across one-third of the gauge face Product may not look exactly like the one shown. Universal! Fits long- & short-necked scuba tanks!

Replacement Air Reservoir, Fits Feinwerkbau P70 & P700 Air Rifles $387.46 Feinwerkbau replacement air reservoir Built-in manometer (air pressure gauge) 2900 psi max air pressure (200 bar) Fits Feinwerkbau P70 & P700 PCP air rifles Instead of carrying a bulky fill tank or a hand pump, take along a spare air reservoir. Fill it up before your match and avoid lugging extra baggage. Same high-quality construction as the original tank that came with your FWB P70 or P700 air rifle.

Vinotemp VT-THERMOHYGRO Humidity and Temperature Gauge $42.63 The Vinotemp VT-THERMOHYGRO humidity and temperature gauge offers an easy way to monitor climate conditions in your wine cellar!

Amaircare Roomaid-VOC HEPA Air Purifier with VOC $179 The Amaircare Roomaid-VOC air purifier features a 24 gauge cold rolled steel construction and a powder coated baked enamel finish.

AirForce Spin-Loc Air Tank, Fits TalonP Air Pistols $188.1 Spin-Loc air tank Connects to an AirForce TalonP pistol without having to remove the tank from the gun Built-in manometer (air pressure gauge) Uses standard quick-disconnect fittings 6.125" long Can be used only with compressed air or dry nitrogen gas Does not fit older models of guns unless they have been retrofitted* to accept the new tank The Spin-Loc air tank makes it much easier for you to refill your tank since you won't have to remove it from your gun. Plus, switching to commonly used quick-disconnect fittings simplifies the whole process. The onboard pressure gauge lets you monitor how much air is left in the tank. No more guessing! *To retrofit your gun to accept the Spin-Loc standard tank, send it to AirForce Airguns.

Air Venturi Tank Adapter Assembly, 4500 psi, for High-Pressure SCBA Tanks $105 Tank adapter assembly Fits high-pressure scba (self-contained breathing apparatus) tank, including the Air Venturi carbon fiber tank 4500 psi Includes bleeder, hose and female quick-disconnect coupling Does not include a manometer (air pressure gauge) Fits the Air Venturi carbon fiber tank--AV-4500HPT [PY-A-350]. Inline manometer (air pressure gauge) sold separately--AV-00031 [PY-A-3865]. Suitable for connecting your high-pressure scba tank to a precharged pneumatic air rifle.

National Target Air Rifle Target, 12 Bullseye, 100 ct $11.94 Air rifle target (12) 1.19" black bullseye 10.5"x12" 100 ct National Target paper targets are great for shot scoring in your backyard or your next shooting competition. These high-quality targets have 12 black bullseye and are made with heavy gauge paper for accurate scoring. Stock up on these excellent targets today!

AirForce Spin-Loc Hi-Flo Air Tank, Fits AirForce Condor Rifles $270 Spin-Loc Hi-Flo air tank Connects to an AirForce Condor rifle without having to remove the tank from the gun Built-in manometer (air pressure gauge) Uses standard quick-disconnect fittings Can be used only with compressed air or dry nitrogen gas Does not fit older models of guns unless they have been retrofitted* to accept the new tank The Spin-Loc air tank makes it much easier for you to refill your tank since you won't have to remove it from your gun. Plus, switching to commonly used quick-disconnect fittings simplifies the whole process. The onboard pressure gauge lets you monitor how much air is left in the tank. No more guessing! *To retrofit your gun to accept the Spin-Loc standard tank, send it to AirForce Airguns.

AirForce Spin-Loc Micro-Meter Air Tank, Fits AirForce Sporting Rifles $246.6 Spin-Loc Micro-Meter air tank Connects to an AirForce Talon/Talon SS or Condor rifle without having to remove the tank from the gun Built-in manometer (air pressure gauge) Uses standard quick-disconnect fittings 10.875" long Can be used only with compressed air or dry nitrogen gas Does not fit older models of guns unless they have been retrofitted* to accept the new tank The Spin-Loc air tank makes it much easier for you to refill your tank since you won't have to remove it from your gun. Plus, switching to commonly used quick-disconnect fittings simplifies the whole process. The onboard pressure gauge lets you monitor how much air is left in the tank. No more guessing! *To retrofit your gun to accept the Spin-Loc standard tank, send it to AirForce Airguns.

AirForce Spin-Loc Standard Air Tank, Fits AirForce Talon & Talon SS Rifles $246.6 Spin-Loc standard air tank Connects to an AirForce Talon/Talon SS rifle without having to remove the tank from the gun Built-in manometer (air pressure gauge) Uses standard quick-disconnect fittings Can be used only with compressed air or dry nitrogen gas Does not fit older models of guns unless they have been retrofitted* to accept the new tank The Spin-Loc air tank makes it much easier for you to refill your tank since you won't have to remove it from your gun. Plus, switching to commonly used quick-disconnect fittings simplifies the whole process. The onboard pressure gauge lets you monitor how much air is left in the tank. No more guessing! *To retrofit your gun to accept the Spin-Loc standard tank, send it to AirForce Airguns.

Morris IA174 Gauge for Air Regulator $31.2 Gauge for Air Regulator.

Accutire Racing Air Gauge $49.95 Accutire Racing Air Gauge priced from $49.95.

Axsor PCP hand pump $239.99 3-stage hand pump Pumps to 3000 psi Integral air pressure gauge Built-in moisture trap Includes a hose ending in female 1/8" BSPP threads Buy optional adapters for pumping AirForce and other brands of PCP guns

Dayva HS041HBH-N-3 Premiere Natural Gas Patio Heater $589.9 The Dayva HS041HBH-N-3 Premiere natural gas patio heater offers heavy gauge steel construction for long lasting and reliable outdoor service!

Patina Products F105 Horseshoes Fire Pit $245 The Patina F105 is up to any task! It features 3 hand-welded legs for ultimate stability and is made with 16 gauge cold pressed steel for years of durability.

Dimplex DEC1000H 1000 Watt Electric Wall Heater $310 The Dimplex DEC1000H 1000 watt electric wall heater boasts an ultra-durable construction from 20 gauge steel for long lasting durability!

Ebac PF400 Portable Industrial Blower and Fan $435.48 The Ebac PF400 portable industrial blower and fan boasts an epoxy powder-coated, heavy gauge steel case for heavy-duty cooling in extreme locations.

Comfort Zone CZ600 Low Profile Baseboard Style Space Heater $58.19 The Comfort Zone CZ600 low profile baseboard style space heater features a heavy gauge heating element for silent, even heating.

Account limit of 2052 requests per hour exceeded.

AEM UEGO Air Fuel Ratio Gauge Review - AEM 30-4100

how do i install a air/fuel gauge on a 97 mustang? i dont know where the wires are located.?

i know were the wires need to go i just dont know what color they are on the ecm and i dont know where the ignition wire is on the colum. i dont want to do a bootleg job so if anyone know how to do it properly please help me out. thanks

go to www.allfordmustangs.com go into the tech department and look it up. I think it is under induction or Engine. Not completely sure. Hope it works. Good Luck.